HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 506

75 TS-1006 TS-1006 Message , [TS-1006], ,, INFO, , Probable Cause Indicates that a time service event is occurring or has failed. The message might be one of the following: • Init failed. Time Service exiting Probable Cause: Initialization error, Time Server exits. • Synchronizing time of day clock Probable Cause: Usually logged during temporary operational issues when the clock goes out of synchronization: For example, when a time update packet is missed due to fabric reconfiguration or role change of the principal or primary fabric configuration server (FCS) switch. If the message does not recur, it should be ignored. • Validating time update Probable Cause: Usually logged during temporary operational issues when a time update packet cannot be validated in a secure fabric. For example, during fabric reconfiguration or role change of the primary FCS switch. If the message does not recur, it should be ignored. Recommended No action is required. Action Severity INFO TS-1007 Message , [TS-1007], ,, WARNING, , Probable Cause Indicates that a switch is trying to set the tsclockserver, which is not the primary fabric configuration server (FCS) across the fabric. A consistent FCS policy must be implemented across the fabric. Recommended Verify that the FCS policy is consistent across the fabriclog_ts.xml. Action Severity INFO TS-1008 Message Probable Cause Recommended Action , [TS-1008], ,, WARNING, , Clock Server used instead of . Indicates that there is a change in the source of fabric time synchronization distributed from the principal or primary fabric configuration server (FCS) switch. Another clock server in the list of clock servers configured is being used. This happens when the network time protocol (NTP) query to the current active external clock server fails. No action is required. 454 Fabric OS Message Reference 53-1000600-02