HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 381

Chapter NS System Messages 53 NS-1001 Message , [NS-1001], ,, WARNING, , The response for request 0x from remote switch 0x is larger than the max frame size the remote switch can support! Probable Cause Indicates that the response payload exceeds the maximum frame size that the remote switch can handle. Recommended Action Run the firmwareDownload command to upgrade the remote switch with firmware v4.3 or higher, as appropriate for the switch type, so that it can support GMI to handle frame fragmentation and reassembly. You can also reduce the number of devices connected to the local switch. Severity WARNING NS-1002 Message , [NS-1002], ,, WARNING, , Remote switch 0x has firmware revision lower than 2.2: which is not supported! Probable Cause Indicates that the local switch cannot interact with the remote switch due to incompatible or obsolete firmware. Recommended Run the firmwareDownload command to upgrade the remote switch to the latest level of firmware. Action Severity WARNING NS-1003 Message Probable Cause , [NS-1003], ,, INFO, , Number of local devices , exceeds the standby can support , can't send update. Indicates that the name server on the standby CP has lower supported capability than the active CP due to different firmware versions running on the active and standby CPs. This means that the active and standby CPs are out of sync. Any execution of the haFailover or firmwareDownload commands will be disruptive. Fabric OS Message Reference 329 53-1000600-02