HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 460

66 SEC-1199 Severity INFO SEC-1199 Message , [SEC-1199], ,, INFO, , Security violation: Unauthorized access to serial port of switch . Probable Cause Indicates that a serial connection policy security violation was reported. An attempt was made to access the serial console on the specified switch instance when it is disabled. Recommended Action Check to see if an authorized access attempt is being made on the console. If so, add the switch world-wide name (WWN) to the serial policy. If the host is not allowed access to the fabric, this is a valid violation message and an unauthorized entity is trying to access your fabric. Take appropriate action, as defined by your enterprise security policy. Severity INFO SEC-1200 Message , [SEC-1200], ,, INFO, , Security violation: MS command is forwarded from non-primary FCS switch. Probable Cause Indicates that a management server (MS) forward security violation was reported. A management server command was forwarded from a non-primary fabric configurations server (FCS) switch. Recommended Action Check the MS policy and verify that the connection is allowed. If the connection is allowed but not specified, enable the connection in the MS policy. If the MS policy does not allow the connection, this is a valid violation message and an unauthorized entity is trying to access your fabric. Take appropriate action, as defined by your enterprise security policy. Severity INFO SEC-1201 Message , [SEC-1201], ,, INFO, , Security violation: MS device operates on non-primary FCS switch. Probable Cause Indicates that a management server (MS) operation security violation was reported. An MS device operation occurred on a non-primary fabric configurations server (FCS) switch. Recommended Action Check the management server policy and verify that the connection is allowed. If the connection is allowed but not specified, enable the connection is MS policy. If the MS policy does not allow the connection, this is a valid violation message and an unauthorized entity is trying to access your fabric. Take appropriate action, as defined by your enterprise security policy. Severity INFO 408 Fabric OS Message Reference 53-1000600-02