HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 213

23 FICN-1045 Probable Cause Protocol errors in emulation in the CU or network errors can cause Selective Reset. Recommended If this was an unexpected event, please contact your vendor's customer support for assistance. Action Severity ERROR FICN-1045 Message , [FICN-1045], ,, WARNING, , HostTapeIng:FICON Purge received:Path=. Probable Cause Purge path received from the locally connected FICON channel. This is performed during the path recovery. Recommended If this was an unexpected event, please contact your vendor's customer support for assistance. Action Severity WARNING FICN-1046 Message , [FICN-1046], ,, WARNING, , HostTapeIng:LRJ received on Path= lastCmds=0x lastStatus=0x treating as system reset event. Probable Cause An LRJ from a FICON channel indicates that the channel believes that it no longer has a path established to the CU. Recommended This is normally an unexpected event, please contact your vendor's customer support for Action assistance. Severity WARNING FICN-1047 Message , [FICN-1047], ,, ERROR, , fcFicSetEmulation:Path= FDCB Not Idle state=0x prevState=0x set to state=0x. Probable Cause This is an internal emulation error and should not be encountered. Recommended This is an unexpected event, please contact your vendor's customer support for assistance. Action Severity ERROR Fabric OS Message Reference 161 53-1000600-02