HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 443

66 SEC-1116 SEC-1116 Message , [SEC-1116], ,, ERROR, , Fail to commit failover. Probable Cause Indicates that there has been a corruption during the distribution of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1117 Message , [SEC-1117], ,, INFO, , Fail to set . Probable Cause Indicates that the switch failed to save the data received by the primary fabric configurations server (FCS) switch. This data can be an FCS password, a non-FCS password, SNMP data, or multiple user authentication data. Recommended Run the secFabricShow command to verify that all switches in fabric are in the ready state. When Action all switches are in the ready state, retry the operation. Severity INFO SEC-1118 Message , [SEC-1118], ,, INFO, , Fail to set SNMP string. Probable Cause Indicates that the SNMP string could not be set. Recommended Usually this problem is transient. Retry the command. Action Severity INFO SEC-1119 Message Probable Cause , [SEC-1119], ,, INFO, , Secure mode has been enabled. Indicates that the secure Fabric OS was enabled by the secModeEnable command. Fabric OS Message Reference 391 53-1000600-02