HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 525

80 ZONE-1034 Probable Cause Indicates that the specified domain has the lowest memory available for the zone database in the fabric. The zone database must be smaller than the memory available on this domain. Recommended Reduce the size of the zone database and retry the operation. Action Severity ERROR ZONE-1034 Message , [ZONE-1034], ,, WARNING, , Zoning file doesn't exist or Corrupted Zoning files detected before reboot, currently the file is saved at Probable Cause Indicates that the zone database is corrupt or zone database is not found. Recommended Use the firmwareDownload command to reinstall the firmware. Action Severity WARNING ZONE-1035 Message , [ZONE-1035], ,, ERROR, , Unable to rename to : error message Probable Cause Indicates that the Fabric OS cannot rename the zone configuration file. Typically the zone configuration is too large for the memory available on the switch. Recommended Reduce the size of the zone database and retry the operation. Action Severity ERROR ZONE-1036 Message , [ZONE-1036], ,, ERROR, , Unable to create : error message Probable Cause Indicates that the Fabric OS cannot create the zone configuration file. Typically the zone configuration is too large for the memory available on the switch. Recommended Reduce the size of the zone database and retry the operation. Action Severity ERROR Fabric OS Message Reference 473 53-1000600-02