HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 386

54 PDM-1011 PDM-1011 Message , [PDM-1011], ,, WARNING, , File read failed: , Length(read=, expected=), errno=. Probable Cause Indicates that the parity data manager (PDM) process could not read data from the specified file. Recommended Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING PDM-1012 Message , [PDM-1012], ,, WARNING, , File write failed: . Length(read=, write=), errno=. Probable Cause Indicates that the parity data manager (PDM) process could not write data to the specified file. Recommended Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING PDM-1013 Message , [PDM-1013], ,, WARNING, , File empty: Probable Cause Indicates that the switch configuration file /etc/fabos/fabos.[0|1].conf is empty. Recommended Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING PDM-1014 Message Probable Cause , [PDM-1014], ,, WARNING, , Access sysmod failed. Indicates that a system call to sysMod failed. 334 Fabric OS Message Reference 53-1000600-02