HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 415

Chapter SCN System Messages 65 SCN-1001 Message , [SCN-1001], , FFDC, CRITICAL, , SCN queue overflow for process Probable Cause Indicates that an attempt to write a state change notification (SCN) message to a specific queue has failed because the SCN queue for the specified daemon name is full. This might be caused by the daemon hanging or if the system is busy. The valid values for daemon name can be: • fabricd • asd • evmd • fcpd • webd • msd • nsd • psd • snmpd • zoned • fspfd • tsd Recommended Action If this message is caused by the system being busy, the condition is temporary. If this message is caused by a hung daemon, the software watchdog will cause the daemon to dump the core and reboot the switch. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL Fabric OS Message Reference 363 53-1000600-02