HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 293

30 FW-1343 Recommended Action Run the errShow command to determine the IP location of the login attempt. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies. Severity WARNING FW-1343 Message , [FW-1343], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the number of login violations has changed from a value outside of the acceptable range to a value within the acceptable range. Login violations indicate that a login failure has been detected. Recommended No action is required. Action Severity INFO FW-1344 Message , [FW-1344], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the number of invalid timestamps has changed. Invalid-timestamp violations indicate that a packet with an invalid timestamp has been received from the primary fabric configuration server (FCS). When the primary FCS downloads a new configuration to other switches in the fabric, the packet is tagged with a timestamp. The receiving switch compares this timestamp to its current time. If the difference is too great, it rejects the packet. This counter keeps track of packets rejected due to invalid timestamps. Recommended Responses to security-class messages depend on user policies. Consult your security administrator Action for response strategies and policies. Severity INFO FW-1345 Message , [FW-1345], ,, INFO, , , is below low boundary(High=, Low=). Current value is . Fabric OS Message Reference 241 53-1000600-02