HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 78

2 AG-1011 AG-1011 Message , [AG-1011], ,, WARNING, , Sending FDISC failed on N_Port . Probable Cause Indicates failure of sending the discover F_Port service parameter request from the Access Gateway to the fabric switch. Recommended Action Please check the configuration of the fabric switch connected to the Access Gateway. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING AG-1012 Message , [AG-1012], ,, WARNING, , Sending logout(LOGO)request failed on N_Port . Probable Cause Failure sending N_Port logout request from the Access Gateway to the fabric switch. Recommended Action Please check the configuration of the fabric switch connected to the Access Gateway. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING AG-1013 Message , [AG-1013], ,, INFO, , F_Ports mapped to N_Port failed over to other N_Port(s). Probable Cause Indicates that the specified N_Port is failing over to other N_Port(s) connected to the same fabric. Recommended Run the ag --mapshow command to display updated F_Port to N_Port mapping. Action Severity INFO AG-1014 Message , [AG-1014], ,, INFO, , Failing back F_Ports mapped to N_Port . Probable Cause Indicates that the specified N_Port is failing back F_Ports mapped to the specified N_Port. Recommended Run the ag --mapshow command to display updated F_Port to N_Port mapping. Action 26 Fabric OS Message Reference 53-1000600-02