HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 383

Chapter PDM System Messages 54 PDM-1001 Message , [PDM-1001], ,, WARNING, , Failed to parse the pdm config. Probable Cause Indicates that the parity data manager (PDM) process could not parse the configuration file. This might be caused by a missing configuration file during the installation. Recommended Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING PDM-1002 Message , [PDM-1002], ,, WARNING, , ipcInit failed. Probable Cause Indicates that the parity data manager (PDM) process could not initialize the inter-process communication (IPC) mechanism. Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity WARNING PDM-1003 Message , [PDM-1003], ,, WARNING, , pdm [-d] -S -s . Probable Cause Indicates that a syntax error occurred when trying to launch the parity data manager (PDM) process. Recommended Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING Fabric OS Message Reference 331 53-1000600-02