HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 373

Chapter MS System Messages 51 MS-1001 Message , [MS-1001], ,, WARNING, , MS Platform Segmented port=( ) Probable Cause Indicates that the management server (MS) has segmented from another switch domain at the specified port number due to errors or inconsistencies defined in the MS platform service. Recommended Reboot or power cycle the switch. Action Severity WARNING MS-1002 Message , [MS-1002], ,, INFO, , MS Platform Service Unstable() Probable Cause The management server (MS) platform service is unstable. The message string can be one of the following: • The switch did not respond to a request for GCAP (MS Get Capabilities) command. Recommended Action: No action is required. • The GCAP (MS Get Capabilities) is supported but the flag for MS platform service is not set. Recommended Action: Set the flag for the MS Platform Service. • The GCAP (MS Get Capabilities) is not supported by another switch. Recommended Action: Upgrade the firmware level on the switch to a level that supports RCS. • The request to the exchange platform database was rejected. The remote switch might be busy. Recommended Action: Wait a few minutes and try the command again. The domain number is the target domain that caused error. Recommended Action The recommended actions are as follows: • No action is required. • Set the flag for the MS Platform Service. Fabric OS Message Reference 321 53-1000600-02