HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 80
AG-1019, or some new N_Port/F_Port has come online.
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
2 AG-1019 Recommended Run switchShow to display the status of all ports in the system. Run portCfgShow to display a list of Action ports currently configured as N_Port(s). Ensure that the host is connected to an F_port. Severity ERROR AG-1019 Message , [AG-1019], ,, WARNING, , Unable to failover N_Port . No other N Port in port group: is online. Probable Cause Failover across port groups is not supported. Recommended Please check whether or not an alternate N_Port is configured in this port group. Action Severity WARNING AG-1020 Message , [AG-1020], ,, INFO, , F_Ports to N_Ports route/mapping has been changed. Probable Cause Indicates that F_Ports to N_Ports mapping has been changed because the switch has come online or some new N_Port/F_Port has come online. Recommended Run the ag --mapshow command to display the updated F_Port to N_Port mapping. Action Severity INFO AG-1021 Message , [AG-1021], ,, WARNING, , Unable to do Preferred-Failover of F_Port . Failover across different fabric is not supported. Probable Cause Failover across N_Ports connected to different fabrics is not supported. Recommended Action Please change the preferred N_Port settings for this F_Port using ag --prefset. Choose the preferred N_Port such that it is in the same fabric as the primary N_Port of this F_Port. Use ag --show to check the fabric connectivity of N_Ports. Severity WARNING AG-1022 Message , [AG-1022], ,, INFO, , F_Port is failed over to its preferred N_Port . 28 Fabric OS Message Reference 53-1000600-02