HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 473

Chapter SNMP System Messages 67 SNMP-1001 Message , [SNMP-1001], ,, ERROR, , SNMP service is not available . Probable Cause Indicates that the simple network management protocol (SNMP) service could not be started because of the specified Reason. You will not be able to query the switch through SNMP. Recommended Verify that the IP address for the Ethernet and Fibre Channel interface is set correctly. If the Action specified Reason is an initialization failure, the switch requires a reboot. Severity ERROR SNMP-1002 Message , [SNMP-1002], ,, ERROR, , SNMP initialization failed. Probable Cause Indicates that the initialization of the simple network management protocol (SNMP) service failed and you will not be able to query the switch through SNMP. Recommended Reboot or power cycle the switch. This will automatically initialize SNMP. Action Severity ERROR SNMP-1003 Message , [SNMP-1003], ,, ERROR, , Distribution of Community Strings to Secure Fabric failed. Probable Cause Indicates that the changes in the simple network management protocol (SNMP) community strings could not be propagated to other switches in the secure fabric. Recommended Retry changing the SNMP community strings from the primary switch. Action Severity ERROR Fabric OS Message Reference 421 53-1000600-02