HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 458

66 SEC-1192 SEC-1192 Message , [SEC-1192], ,, INFO, , Security violation: Login failure attempt via . Probable Cause Indicates that a serial or modem login security violation was reported. An incorrect password was used while trying to log in through a serial or modem connection; the login failed. Recommended Use the correct password. Action Severity INFO SEC-1193 Message , [SEC-1193], ,, INFO, , Security violation: Login failure attempt via . IP Addr: Probable Cause Indicates that a specified login security violation was reported. The incorrect password was used while trying to log in through the specified connection method; the login failed. Recommended The error message lists the violating IP address. Verify that this IP address is being used by a valid Action switch admin. Use the correct password. Severity INFO SEC-1194 Message , [SEC-1194], ,, WARNING, , This switch does not have all the required PKI objects correctly installed. Probable Cause Indicates that there has been a corruption during the distribution of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity WARNING SEC-1195 Message , [SEC-1195], ,, WARNING, , This switch has no license. 406 Fabric OS Message Reference 53-1000600-02