HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 447

66 SEC-1139 SEC-1139 Message , [SEC-1139], ,, ERROR, , The RSNMP_POLICY cannot exist without the WSNMP_POLICY. Probable Cause Indicates that the receiving switch fails to validate the security database sending from the primary fabric configurations server (FCS) switch. This message usually indicates that the data package is corrupted, the time stamp on the package is out of range as a result of a replay attack or out-of-sync time service, or the signature verification failed. Signature verification failure indicates either an internal error (such as losing the primary public key) or an invalid database. Recommended Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that switch. This message might also be the result of an internal corruption or a hacker attack to the secure fabric. Severity ERROR SEC-1142 Message , [SEC-1142], ,, INFO, , Reject new policies. . Probable Cause Indicates that the new polices are rejected due to the reason specified. Recommended Use proper syntax when entering policy information. Action Severity INFO SEC-1145 Message , [SEC-1145], ,, INFO, , A security admin event has occurred. This message is for information purpose only. The message for individual event is: Probable Cause Indicates one of the following has occurred: • The names for the specified policies have changed. • The passwords have changed for the specified accounts. • The SNMP community strings have been changed. Recommended Action Verify that the security event was planned. If the security event was planned, no action is required. If the security event was not planned, take appropriate action as defined by your enterprise security policy. Severity INFO Fabric OS Message Reference 395 53-1000600-02