HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 121

C2 System Messages Chapter 8 C2-1001 Message , [C2-1001], ,, ERROR, , Port port fault (the configured speed may not be supported by the SFP). Please change the SFP or check the cable. Probable Cause Indicates a deteriorated SFP, an incompatible SFP pair, or a faulty cable between the peer ports. Recommended Verify that you are using compatible SFPs on the peer ports. Verify that the SFPs have not Action deteriorated and the Fibre Channel cable is not faulty. Replace SFPs or cable if necessary. Severity ERROR C2-1002 Message , [C2-1002], ,, ERROR, , Port chip faulted due to an internal error. Probable Cause Internal error. All the ports on the blade/switch will be disrupted. Recommended For a bladed system, perform slotpoweroff and slotpoweron on the blade to recover the system. For Action a non-bladed system, perform fastboot on the switch to recover the system. Severity ERROR C2-1004 Message , [C2-1004], ,, ERROR, , ,: Invalid DMA ch pointer, chan:, good_addr: bad_addr: Probable Cause Indicates an internal error in the Application-Specific Integrated Circuit (ASIC) hardware that may degrade data traffic. Recommended Whenever this error is observed, reboot the system at the next maintenance window. If the problem Action persists, replace the blade. Severity ERROR Fabric OS Message Reference 69 53-1000600-02