HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 375

51 MS-1005 Severity INFO MS-1005 Message , [MS-1005], ,, ERROR, , MS Invalid CT Response from d= Probable Cause Indicates that the management server (MS) received an invalid common transport (CT) response from switch domain. MS expects either a CT accept IU or a reject IU; MS received neither response, which violates the Fibre Channel Generic Services (FS-GS) specification. Recommended Check the integrity of the FC switch at the specified domain. It is not sending correct MS Action information as defined by the FC-FS standard. Severity ERROR MS-1006 Message , [MS-1006], ,, ERROR, , MS Unexpected iu_data_sz= Probable Cause Indicates that management server (MS) received information unit (IU) data of unexpected size. The IU payload and the IU size might be inconsistent with each other or with the command that is currently being processed. Recommended Action Wait a few minutes and try the operation again. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR MS-1008 Message , [MS-1008], ,, ERROR, , MS Failure while initializing Probable Cause The management server (MS) failed while initializing the specified action. The following actions might be displayed: • MS is unable to write a message to the MS Extended Link Service Queue. • MS is unable to add a timer to a resource. Recommended Action This message is often transitory. If the message persists, check the available memory on the switch using memShow. Severity ERROR Fabric OS Message Reference 323 53-1000600-02