HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 420

66 SEC-1022 Recommended Check for unauthorized access to the switch through the SSH connection. Action Severity INFO SEC-1022 Message , [SEC-1022], ,, WARNING, , Failed to PKI objects. Probable Cause Indicates that the fabric failed to generate or validate either the public or private key pair or the certificate signing request (CSR). Recommended Action Run the pkiShow command and verify that all public key infrastructure (PKI) objects exist on the switch. If the private key does not exist, follow the steps for re-creating PKI objects, outlined in the Secure Fabric OS Administrator's Guide. If a certificate does not exist or is invalid, install the certificate by following the field upgrade process. Severity WARNING SEC-1024 Message , [SEC-1024], ,, INFO, , The security database is too large to fit in flash. Probable Cause Indicates that the size of the security database is too large for the flash memory. The size of the security database increases with the number of entries in each policy. Recommended Reduce the size of the security database by reducing the number of entries within each policy. Action Severity INFO SEC-1025 Message , [SEC-1025], ,, ERROR, , Invalid IP address () detected. Probable Cause Indicates that a corruption occurred during the distribution of the security database. This can occur only when the primary fabric configurations server (FCS) distributes the security database to the other switches in the fabric, then local validation finds the error in the security database. This is a rare occurrence. Recommended Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity ERROR 368 Fabric OS Message Reference 53-1000600-02