HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 453

66 SEC-1172 Run the licenseAdd command to install the required license key. Refer to your switch supplier to obtain a license if you do not have one. Severity ERROR SEC-1172 Message , [SEC-1172], ,, ERROR, , Failed to identify role. Probable Cause Indicates that the switch is unable to determine its role (primary FCS or backup FCS) in the secure fabric. Recommended Verify that all switches in the fabric are in time synchronization with the primary and that no Action external entity is trying to access the fabric. When verification is complete, retry the operation. Severity ERROR SEC-1173 Message , [SEC-1173], ,, ERROR, , Lost contact with Primary FCS switch. Probable Cause Indicates that the switch has lost contact with the primary fabric configurations server (FCS) switch in the secure fabric. This could be due to the primary FCS being disabled. Recommended If the primary FCS was disabled intentionally, no action is required; if not, check the primary FCS. Action Severity ERROR SEC-1174 Message , [SEC-1174], ,, ERROR, , Failed to set password. Probable Cause Indicates that the FCS or non-FCS password could not be set. Recommended Verify that all switches in the fabric are in time synchronization with the primary and that no Action external entity is trying to access the fabric. When verification is complete, retry the operation. Severity ERROR SEC-1175 Message Probable Cause , [SEC-1175], ,, ERROR, , Failed to install zone data. Indicates that the zone database could not be installed on the switch. Fabric OS Message Reference 401 53-1000600-02