HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 82

2 AG-1026 AG-1026 Message , [AG-1026], ,, WARNING, , Unable to handle the login request on port due to insufficient resources. Probable Cause Insufficient resources. Recommended Action Run configure CLI on AG switch and increase the number of allowed logins on this port. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING AG-1027 Message , [AG-1027], ,, WARNING, , Unable to handle this login request on port because NPIV capability is not enabled on this port. Probable Cause NPIV not enabled. Recommended Run portcfgnpivport CLI on AG switch and enable the NPIV capability on this port. Action Severity WARNING AG-1028 Message , [AG-1028], ,, WARNING, , Device with Port WWN tried to perform fabric login through port , without having access permission. Probable Cause Device does not have access to login as per ADS policy set by user for that port. Recommended Add the device in to the ADS allow list for that port using ag --adsadd command. Action Severity WARNING 30 Fabric OS Message Reference 53-1000600-02