HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 430

66 SEC-1064 Severity ERROR SEC-1064 Message , [SEC-1064], ,, ERROR, , Failed to sign message. Probable Cause Indicates that the public key infrastructure (PKI) objects on the switch are not in a valid state and the signature operation failed. Recommended Run the pkiShow command to verify that all PKI objects are valid. If PKI objects are not valid, Action generate the PKI objects and install the certificate by following the field upgrade process. Severity ERROR SEC-1065 Message , [SEC-1065], ,, ERROR, , Invalid character in list. Probable Cause Indicates that the input list has an invalid character. Recommended Enter valid input. Action Severity ERROR SEC-1069 Message , [SEC-1069], ,, ERROR, , Security Database is corrupted. Probable Cause Indicates that the security database is corrupted for unknown reasons. Recommended Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command Action and contact your switch service provider. Severity ERROR SEC-1071 Message , [SEC-1071], ,, ERROR, , No new security policy data to apply. Probable Cause Indicates that no changes in the defined security policy database need to be activated at this time. Recommended Verify that the security event was planned. First change some policy definitions, then run the Action secPolicyActivate command to activate the policies. 378 Fabric OS Message Reference 53-1000600-02