HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 499
TRCE System Messages, TRCE-1001
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 499 highlights
Chapter TRCE System Messages 73 TRCE-1001 Message , [TRCE-1001], ,, WARNING, , Trace dump available< optional slot indicating on which slot the dump occurs >! (reason: ) Probable Cause Indicates that trace dump files have been generated on the switch or the indicated slot. The reason field indicates the cause for generating the dump as one of the following: • PANICDUMP generated by panic dump • WATCHDOG EXPIRED generated by hardware watchdog expiration • MANUAL generated by the tracedump -n command Recommended Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command Action and contact your switch service provider. Severity WARNING TRCE-1002 Message , [TRCE-1002], ,, INFO, , Trace dump< optional slot indicating on which slot the dump occurs > automatically transferred to FTP address ' '. Probable Cause Indicates that a trace dump has occurred on the switch or the indicated slot and is successfully transferred from the switch automatically. Recommended No action is required. Action Severity INFO TRCE-1003 Message Probable Cause , [TRCE-1003], ,, ERROR, , Trace dump< optional slot indicating on which slot the dump occurs > was not transferred due to FTP error. Indicates that a trace dump has been created on the switch or the indicated slot but is not automatically transferred from the switch due to an FTP error, such as a wrong FTP address, FTP site down, or network down. Fabric OS Message Reference 447 53-1000600-02