HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 277

30 FW-1275 Probable Cause Indicates that the number of frame types or commands that the port receives has risen above the high boundary. The port has received a small computer system interface (SCSI) Read, SCSI Write, SCSI Read and Write, SCSI Traffic, or IP commands in a frame. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1275 Message , [FW-1275], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the number of frame types or commands that the port receives has changed from a value outside of the acceptable range to a value within the acceptable range. The port has received a small computer system interface (SCSI) Read, SCSI Write, SCSI Read and Write, SCSI Traffic, or IP commands in a frame. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1296 Message , [FW-1296], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the number of Telnet violations has changed. Telnet violations indicate that a Telnet connection request has been received from an unauthorized IP address. The TELNET_POLICY contains a list of internet protocol (IP) addresses that are authorized to establish Telnet connections to switches in the fabric. Recommended Action Run the errShow command to determine the IP address that sent the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies. Severity INFO FW-1297 Message , [FW-1297], ,, INFO, , , is below low boundary(High=, Low=). Current value is . Fabric OS Message Reference 225 53-1000600-02