Home » HP Manuals » Storage Devices » HP StorageWorks 8/80 » Manual Viewer

HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 225

FICU System Messages, FICU-1001 - 24 firmware

View all HP StorageWorks 8/80 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 225 highlights

Chapter FICU System Messages 24 FICU-1001 Message , [FICU-1001], ,, ERROR, , : config failed rc = . Probable Cause Indicates that one of the configuration management functions failed. The key variable is part of the Fabric OS configuration database and is for support use only. The error variable is an internal error number. Recommended Action Execute an haFailover on the switch if it has redundant control processors (CPs) or reboot the switch. Run the supportShow command to check if your flash is full. If the flash is full, run the supportSave command to clear the core files. Refer to the Fabric OS Command Reference for more information on these commands. Severity ERROR FICU-1002 Message , [FICU-1002], ,, ERROR, , : Failed to get RNID from Management Server: Domain=, rc=. Probable Cause Indicates that the fibre connectivity control unit port (FICON-CUP) daemon failed to get the switch request node ID (RNID) from the management server due to a Fabric OS problem. The domain variable displays the domain ID of the target switch for this request node ID (RNID). The error variable is an internal error number. Recommended Action If this is a bladed switch, execute the haFailover command. If the problem persists, or if this is a nonbladed switch, download a new firmware version using the firmwareDownload command. Refer to the Fabric OS Command Reference for more information on this command. Severity ERROR FICU-1003 Message , [FICU-1003], ,, WARNING, , : FICON-CUP License Not Installed: (). Probable Cause Indicates that the fibre connectivity control unit port (FICON-CUP) license is not installed on the switch. Recommended Action Run the licenseShow command to check the installed licenses on the switch. The switch cannot be managed using FICON-CUP commands until the FICON-CUP license is installed. Contact your switch supplier for a FICON-CUP license. Run the licenseAdd command to add the license to your switch. Fabric OS Message Reference 173 53-1000600-02

Section	Page
Contents	5
About This Document	47
In this chapter	47
How this document is organized	47
Supported hardware and software	47
What’s new in this document	48
Document conventions	48
Text formatting	48
Notes, cautions, and warnings	49
Key terms	49
Additional information	50
Brocade resources	50
Other industry resources	50
Getting technical help	50
Document feedback	51
Introduction To System Messages	53
Overview of System Messages	53
System Error Message Logging	53
Event Auditing	54
System Logging Daemon (syslogd)	55
System Console	55
Port Logs	56
Viewing and Configuring System Message Logs	56
Viewing System Messages from Web Tools	58
Dumping System Messages	58
Viewing System Messages One Message at a Time	59
Clearing the System Message Log	59
Configuring Event Auditing	59
Reading a RAS System Message	60
Audit Event Messages	61
Message Severity Levels	63
Responding to a System Message	63
Looking Up a System Message	63
Gathering Information About the Problem	64
Support	64
Panic Dump and Core Dump Files	64
Trace Dumps	65
supportSave Command	65
System Module Descriptions	65
RASLog Messages	71
AG System Messages	75
AUTH System Messages	83
BKSW System Messages	97
BL System Messages	99
BLL System Messages	113
BM System Messages	115
C2 System Messages	121
CDR System Messages	123
CER System Messages	125
CONF System Messages	127
EM System Messages	129
ESS System Messages	147
EVMD System Messages	149
FABR System Messages	151
FABS System Messages	163
FBC System Messages	169
FCIP System Messages	171
FCMC System Messages	173
FCPD System Messages	175
FCPH System Messages	177
FCR System Messages	179
FICON System Messages	201
FICU System Messages	225
FKLB System Messages	229
FLOD System Messages	231
FSPF System Messages	233
FSS System Messages	235
FSSM System Messages	239
FW System Messages	241
HAM System Messages	315
HAMK System Messages	319
HIL System Messages	321
HLO System Messages	335
HMON System Messages	337
HTTP System Messages	339
IBD System Messages	341
IBPD System Messages	343
ICPD System Messages	345
IPAD System Messages	349
IPS System Messages	351
ISCS System Messages	353
ISNS System Messages	355
KSWD System Messages	359
KTRC System Messages	361
LOG System Messages	363
LSDB System Messages	365
MFIC System Messages	367
MPTH System Messages	369
MQ System Messages	371
MS System Messages	373
NBFS System Messages	379
NS System Messages	381
PDM System Messages	383
PDTR System Messages	391
PLAT System Messages	393
PORT System Messages	395
PS System Messages	397
PSWP System Messages	399
RAS System Messages	401
RCS System Messages	405
RPCD System Messages	409
RTWR System Messages	411
SAS System Messages	413
SCN System Messages	415
SEC System Messages	417
SNMP System Messages	473
SS System Messages	475
SULB System Messages	477
SWCH System Messages	491
SYSC System Messages	495
SYSM System Messages	497
TRCE System Messages	499
TRCK System Messages	503
TS System Messages	505
UCST System Messages	509
UPTH System Messages	511
WEBD System Messages	513
ZOLB System Messages	515
ZONE System Messages	517
Audit Log Messages	529
AUDIT AUTH System Messages	531
AUDIT CONF System Messages	535
AUDIT FW System Messages	537
AUDIT HTTP System Messages	539
AUDIT SEC System Messages	541
AUDIT SNMP System Messages	557
AUDIT SULB System Messages	559

Match case Limit results 1 per page

Fabric OS Message Reference

173

53-1000600-02

Chapter

FICU System Messages

FICU-1001

Message

<timestamp>, [FICU-1001], <sequence-number>,, ERROR, <system-name>, <function

name>: config<config Set(key)|Get(key)| Save> failed rc = <error>.

Probable Cause

Indicates that one of the configuration management functions failed. The

key

variable is part of the

Fabric OS configuration database and is for support use only. The

error

variable is an internal error

number.

Recommended

Action

Execute an

haFailover

on the switch if it has redundant control processors (CPs) or reboot the

switch. Run the

supportShow

command to check if your flash is full. If the flash is full, run the

supportSave

command to clear the core files. Refer to the

Fabric OS Command Reference

for more

information on these commands.

Severity

ERROR

FICU-1002

Message

<timestamp>, [FICU-1002], <sequence-number>,, ERROR, <system-name>, <function

name>: Failed to get RNID from Management Server: Domain=<domain>, rc=<error>.

Probable Cause

Indicates that the fibre connectivity control unit port (FICON-CUP) daemon failed to get the switch

request node ID (RNID) from the management server due to a Fabric OS problem. The

domain

variable displays the domain ID of the target switch for this request node ID (RNID). The

error

variable is an internal error number.

Recommended

Action

If this is a bladed switch, execute the

haFailover

command. If the problem persists, or if this is a

nonbladed switch, download a new firmware version using the

firmwareDownload

command. Refer

to the

Fabric OS Command Reference

for more information on this command.

Severity

ERROR

FICU-1003

Message

<timestamp>, [FICU-1003], <sequence-number>,, WARNING, <system-name>, <function

name>: <message> FICON-CUP License Not Installed: (<error>).

Probable Cause

Indicates that the fibre connectivity control unit port (FICON-CUP) license is not installed on the

switch.

Recommended

Action

Run the

licenseShow

command to check the installed licenses on the switch. The switch cannot be

managed using FICON-CUP commands until the FICON-CUP license is installed. Contact your switch

supplier for a FICON-CUP license. Run the

licenseAdd

command to add the license to your switch.