HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 449
SEC-1155, SEC-1156, SEC-1157, SEC-1158
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 449 highlights
66 SEC-1155 SEC-1155 Message , [SEC-1155], ,, INFO, , PID change failed: . Probable Cause Indicates that either the defined or active policy was too large after modifying the index/area ID. The status values can be either defined, active, or both. A negative value means that a policy set was failed by the daemon. Recommended Reduce the size of the specified policy database. Action Severity INFO SEC-1156 Message , [SEC-1156], ,, INFO, , Change failed: . Probable Cause Indicates that the security daemon is busy. The status values can be either defined, active, or both. A negative value means that a policy set was failed by the daemon. Recommended Action For the first reject, wait a few minutes and then resubmit the transaction. Fabric-wide commands might take a few minutes to propagate throughout the fabric. Make sure to wait a few minutes between executing commands so that your commands do not overlap in the fabric. Severity INFO SEC-1157 Message , [SEC-1157], ,, INFO, , PID Change failed: . Probable Cause Indicates that the provisioning resources for a security policy failed due to low memory or internal error. The status values can be either defined, active, or both. A negative value means that a policy set was failed by the daemon. Recommended Action Retry the failed command. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity INFO SEC-1158 Message , [SEC-1158], ,, INFO, , Invalid name . Fabric OS Message Reference 397 53-1000600-02