HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 255

30 FW-1126 FW-1126 Message , [FW-1126], ,, INFO, , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of segmentations has fallen below the low boundary. Segmentation changes might occur due to: • Zone conflicts. • Domain conflicts. • Segmentation of the principal link between two switches. • Incompatible link parameters. During E_Port initialization, ports exchange link parameters. Rarely, incompatible parameters result in segmentation. A low number of segmentation errors means that the fabric is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1127 Message , [FW-1127], ,, INFO, , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of segmentations has risen above the high boundary. Segmentation changes might occur due to: • Zone conflicts. • Domain conflicts. • Segmentation of the principal link between two switches. • Incompatible link parameters. During E_Port initialization, ports exchange link parameters. Rarely, incompatible parameters result in segmentation. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1128 Message Probable Cause , [FW-1128], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Indicates that the number of segmentations has changed from a value outside of the acceptable range to a value within the acceptable range. Segmentation changes might occur due to: Fabric OS Message Reference 203 53-1000600-02