Sharp MX-M363N Installation Manual - Page 43

C. Staple cartridge installation, D. Height adjustment of the finisher

Get Sharp MX-M363N PDF manuals and user guides View all Sharp MX-M363N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

2) Fix the paper holding A with fixing screws A (package part No. 6). (1) When the guide pin is not fit with the connection hole in the finisher: 1) Loosen the fixing screw of the adjustment section on the rear side. Adjust the height adjustment screw so that the guide pin is fit with the connection hole in the finisher. * By making space between the main body and ground, the adjustment screw can be turned by the finger. 3) Installation of tee saddle tray and paper holding B. 2 1 2) Remove the two screws, and remove the front under cover and foot cover. C. Staple cartridge installation 1) Insert the staple cartridge (package part No. 9). 1 2 3) Loosen the fixing screw of the adjustment section on the front side. If the guide pin is inserted smoothly, tighten the fixing screws of the adjustment section on the front/rear sides. * By making space between the main body and ground, the adjustment screw can be turned by the finger. D. Height adjustment of the finisher 1) Put the finisher closer to the main unit, and check to insure that the guide pin is smoothly inserted into the connection hole. A A Connection hole Guide pin * If the guide pin is not inserted smoothly, perform the follow- ing adjustment. MX-M503N MX-FN10 7 - 3 2 1

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
MX-M503N
MX-FN10
7 – 3
2)
Fix the paper holding A with fixing screws A (package part No.
6).
3)
Installation of tee saddle tray and paper holding B.
C.
Staple cartridge installation
1)
Insert the staple cartridge (package part No. 9).
D.
Height adjustment of the finisher
1)
Put the finisher closer to the main unit, and check to insure that
the guide pin is smoothly inserted into the connection hole.
*
If the guide pin is not inserted smoothly, perform the follow-
ing adjustment.
(1)
When the guide pin is not fit with the connection
hole in the finisher:
1)
Loosen the fixing screw of the adjustment section on the rear
side. Adjust the height adjustment screw so that the guide pin
is fit with the connection hole in the finisher.
*
By making space between the main body and ground, the
adjustment screw can be turned by the finger.
2)
Remove the two screws, and remove the front under cover
and foot cover.
3)
Loosen the fixing screw of the adjustment section on the front
side. If the guide pin is inserted smoothly, tighten the fixing
screws of the adjustment section on the front/rear sides.
*
By making space between the main body and ground, the
adjustment screw can be turned by the finger.
Guide pin
Connection hole
A
A
1
2
2
1
2
1