Sharp MX-M363N Installation Manual - Page 80
MX-EBX3, 1. Unpacking, A. Old type, B. Type A, C. Type B/Type C - firmware
View all Sharp MX-M363N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
1 : '10/Jun/18 M[1X-7M]50M3NX-EBX3 * This option cannot be installed to the U model. 1. Unpacking The MX-EBX3 is available in the following three types. Instillation must be performed according to the type. A. Old type (1) Parts included A3MXEBX3* SBe. rTvyipceeAManual (1) Parts included A3MXEBX3* FS9205S A 9B2 R. C. Identification marking A : Type A The identification mark " A " is indicated on the side of the package of type A. 1 No. Packed part names 1 Scanner function expansion PWB (ACRE PWB) Quantity 1 • The old-type MX-EBX3 is not provided with the mounting plate and the screws (M3 x 6S tight) which are required for installation. To use the old-type machine, these necessary parts must be obtained separately as service parts. Mounting plate: LPLTM7873FCZZ x 1 Screw: XHBS730P06000 x 2 • Firmware The firmware must be revised to the latest version. The ACRE firmware version must be 02.00.J2 or later. 1 23 No. Packed part names 1 Scanner function expansion PWB 2 Mounting plate 3 Screw (M3 x 6 S tight) Quantity 1 1 2 • The MX-EBX3 of type A is provided with all the parts necessary for installation. • Firmware The firmware must be revised to the latest version. The ACRE firmware version must be 02.00.J2 or later. C. Type B/Type C 1 (1) Parts included A3MXEBX3* FS9205S 9B2 R. C. Identification marking B : Type B 1 C : Type C 1 23 No. Packed part names 1 Scanner function expansion PWB 2 Mounting plate 3 Screw (M3 x 6 S tight) Quantity 1 1 2 • The MX-EBX3 of type B is provided with all the parts necessary for installation. • Firmware Basically, the firmware of the machine of type B may not revised. For double sure, however, use SIM22-5 to check the firmware version and revise to the latest version as needed. MX-M503N MX-EBX3 17 - 1