Sharp MX-M363N Installation Manual - Page 62
B. Connection of connector of the finisher and punch unit, C. Install of the Connection fixture F/R
View all Sharp MX-M363N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
6) Open the front door of punch unit. C. Install of the Connection fixture F/R 1) Install the Connection fixture F (Package part No. 7) to the main unit with the fixing screws (Package part No. 4). 7) Engage the pawls of the rear side of front cover (Package part No. 5), attach the front cover with the fixing screw (Package part No. 1). 2) Install the Connection fixture R (Package part No. 8) to the main unit with the fixing screws (Package part No. 4). B. Connection of connector of the finisher and punch unit 1) Remove the fixing screws, and remove the rear cover. D. Check of the connected position of main unit and finisher 1) Engage the finisher that has installed punch unit to the main unit, and temporarily fix. * Insert the rail of the finisher unit into the rail reception fixture of main unit, fix temporarily. 2) Connect two connectors of the finisher to the PWB of punch unit, and fix the harness to the clamp. MX-M503N MX-PNX6A/B/C/D 10 - 3