Sharp MX-M363N Installation Manual - Page 8
G. Note for handling the drum unit, the transfer unit, the developing unit, and the fusing unit
View all Sharp MX-M363N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
1 : '10/Jun/18 G. Note for handling the drum unit, the transfer unit, the developing unit, and the fusing unit When handling the OPC drum unit, the transfer unit, and the developing unit, strictly observe the following items. If these items are neglected, a trouble may be generated in the copy and print image quality. (Drum unit) 1) Avoid working at a place with strong lights. 2) Do not expose the OPC drum to lights including interior lights for a long time. 3) When the OPC drum is removed from the machine, cover it with light blocking material. (When using paper, use about 10 sheets of paper to cover it.) 4) Be careful not to attach fingerprints, oil, grease, or other foreign material on the OPC drum surface. (Transfer unit) 1) Be careful not to attach fingerprints, oil, grease, or other foreign material on the transfer roller. (Developing unit) 1) Be careful not to attach fingerprints, oil, grease, or other foreign material on the developing unit. (Fusing unit) 1) Be careful not to put fingerprints, oil, grease, or other foreign material on the fusing roller and the external heating belt. 2) Do not leave the fusing roller in contact state for a long time. 2. Transit and delivery No. Content 1 Implements, facility, and man power 2 Delivery Method Use a forklift. (If no forklift is available, manpower of two persons is required.) Transit must be made in packed condition. A. Implements, facility, and manpower It is recommendable to use a forklift for bringing in the machine for safety. If no forklift is available, man-power of two persons is required. The machine is considerably heavy, and requires safety precautions for delivery and installation. Transit of the machine must be made in packed condition to the installing place. Since the hard disk drive is built in the machine, use care not to exert vibrations or shocks to the machine when in transit. B. Delivery Remove the packing materials prior to installation in the office environment. 3. Unpacking A. Unpacking procedure 1) Remove the PP band. 2) Remove the internal packing pads with the machine. B. Removal of the fixing tape, protection material 1 and parts packed together • MX-M283N/M363N/M363U/M453N/M453U/M503N/M503U MX-M503N MX-M283N/M363N/M363U/M453N/M453U/M503N/M503U/M282N/M362N/M452N/M502N 1 - 3