AMD AMD-K6-2/500AFX Data Sheet - Page 130

AMD-K6®-2 Processor Data Sheet Preliminary Information 21850J/0-February 2000 4.33 LOCK# (Bus Lock) Output Summary The processor asserts LOCK# during a sequence of bus cycles to ensure that the cycles are completed without allowing other bus masters to intervene. Locked operations consist of two to five bus cycles. LOCK# is asserted during the following operations: s An interrupt acknowledge sequence s Descriptor Table accesses s Page Directory and Page Table accesses s XCHG instruction s An instruction with an allowable LOCK prefix In order to ensure that locked operations appear on the bus and are visible to the entire system, any data operands addressed during a locked cycle that reside in the processor's cache are flushed and invalidated from the cache prior to the locked operation. If the cache line is in the modified state, it is written back and invalidated prior to the locked operation. Likewise, any data read during a locked operation is not cached. Driven and Floated The processor is designed so that LOCK# does not glitch. During a locked cycle, LOCK# is asserted off the same clock edge on which ADS# is asserted and remains asserted until the last BRDY# of the last bus cycle is sampled asserted. The processor negates LOCK# for at least one clock between consecutive sequences of locked operations to allow the system logic to arbitrate for the bus. LOCK# is floated off the clock edge that BOFF# is sampled asserted and off the clock edge that the processor asserts HLDA in response to HOLD. When LOCK# is floated due to BOFF# sampled asserted, the system logic is responsible for preserving the lock condition while LOCK# is in the high-impedance state. 110 Signal Descriptions Chapter 4