Brother International PE-DESIGN Ver.4 3 2 Instructin Manual for PE-DESIGN Ver. - Page 104
Select a pattern for Programmable Fill Stitch., Pattern Size
View all Brother International PE-DESIGN Ver.4 3 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Contents Before Using Getting Started Design Center Direction Pull Compensation Sets the direction of the stitch. Range: 0 - 179 degrees Default: 45 degrees 90˚ 135˚ 45˚ 179˚ 0˚ Lengthens the sewing region in the stitch pattern's sewing direction to prevent pattern shrinkage during sewing. Range:0 - 2 mm (0.00 - 0.08 inch) Default:0 mm (0.00 inch) Fill stitch only: Step Pitch Frequency Sets the pitch of the steps. Range: 1 - 10 mm (0.04 - 0.39 inch) Default: 4.0 mm (0.16 inch) Sets the spacial frequency steps. Range: 0 - 99% Default: 30% Step pitch 0% 30% Programmable fill stitch only: Pattern Pattern Size Offset Width Height Direction Value Pattern Direction Select a pattern for Programmable Fill Stitch. Click Select Pattern, and the Browse dialog opens. Select the folder containing the pas file you want to open. Scroll through the available stitch patterns and double-click the desired pattern or click OK to select the pattern. Sets the stitch pattern width. Range: 5 - 10 mm (0.20 - 0.39 inch) Default: 7.5 mm (0.30 inch) Sets the stitch pattern height. Range: 5 - 10 mm (0.20 - 0.39 inch) Default: 7.5 mm (0.30 inch) Sets the offset arrangement of the pattern, and sets the direction of offset as Row/Column. When the pattern's arrangement is offset, sets the amount of offset. Range: 0 - 99 % Default: 0 % Allows you to rotate the angle of the stitch patterns. Range: 0 - 359 degrees Default: 0 degrees Layout & Editing File Utility Programmable Stich Creator Quik Reference Alphabetic Index Motif stitch only: Use Pattern Pattern 94 Selects whether to use pattern 1 or pattern 2 for Motif. If you choose to use both patterns, the data is created so that sewing is alternated between them after each row. Pattern1 only: Uses only pattern 1 (Default) Pattern2 only: Uses only pattern 2 Pattern1 and 2: Uses pattern 1 and pattern 2 Select a pattern for Motif sewing. Click Select Pattern, and the Browse dialog will display. Select the folder containing the pmf file you want to open. Scroll through the available stitch patterns and double-click the desired pattern or click OK to select the pattern