Brother International PE-DESIGN Ver.4 3 2 Instructin Manual for PE-DESIGN Ver. - Page 155
Stitch, When you select
View all Brother International PE-DESIGN Ver.4 3 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
Contents Before Using Getting Started 5 Add details as you would with a normal embroidery picture. APPLIQUE MATERIAL / APPLIQUE POSITION / APPLIQUE When sewing, proceed as follows: 1 Place the appliqué material on the machine and start sewing. At this step, only the APPLIQUE MATERIAL outline will be sewn. 2 Remove the appliqué material from the machine and cut along the outline. 3 Place the backing material on the machine and start sewing. At this step, only the APPLIQUE POSI- TION outline will be sewn. 4 Affix the appliqué on the marked position with a small amount of fabric glue. 5 Restart sewing. At this step, the APPLIQUE outline will be sewn. 6 Sew the other details of the picture. Note that the sewing order will be MATERIAL ® POSITION ® APPLIQUE. s Stitch Purpose: Sets the stitch for outline, region inside, text, manual punching pattern and imported pattern (after the Stitch to Block function has been applied). Available: When the cursor is in the selection mode, the Line sew type and Region sew type selectors are displayed (if they have not been turned off with the Line sew or Region sew buttons). When you start one of the drawing modes or select an existing pattern, the sew type button for that pattern appears. When you are in the text or manual punching mode or after applying a Stitch to block setting to an imported pattern. Operation: 1 Click the sew type selector. The available options display. Design Center Layout & Editing File Utility Programmable Stich Creator Quik Reference Alphabetic Index For outlines, Zigzag, Running and Motif stitches are available. For regions, Satin, Fill, Programmable Fill and Motif stitches are available. 2 Click the desired stitch. The setting applies to all the patterns of the same categories that you will create until you change it. If a pattern is selected, the setting also applies to that pattern. NOTE: You can set the stitch attributes for the selected line and region stitches in the Sewing attribute Setting dialog. When you select Prog. fill Stitch or Motif Stitch, you also need to select a pattern in the Sewing Attribute Setting dialog, as there is no default programmable stitch setting. See also: "Line sew" on page 141, "Region sew" on page 142 and "Sewing Attribute Setting" on page 177 145