Brother International PE-DESIGN Ver.4 3 2 Instructin Manual for PE-DESIGN Ver. - Page 120

Contents Before Using x Use the ZOOM slider to zoom in and out on the image, as necessary. x In the Mask Type section in the bottom of the dialog, select the trimming shape you want to use for the Mask, and edit the Mask in the shape you want to use. When the dialog opens, the square Mask is selected. Change the size of the Mask by dragging the handles on the outside of the Mask. If you select the Arbitrary Shape Mask , the first display shows white square handles in the four corners of the square Mask. You can move points, enter points, delete points, or edit this square Mask however you like in the Point Edit mode in Stage 3 (see page 122). Getting Started Design Center Layout & Editing File Utility Programmable Stich Creator (Pattern edited with the round Mask) (Pattern edited with the arbitrary shape Mask) NOTE: The Mask size can be set in the range from 64 ´ 64 dots to the size of the image data. [Emphasizing the Outline] In the Select Mask dialog above, click the Tune Image button, and the Tune Image dialog similar to this will display. You can make the image brighter or darker (clearer or less sharp). x Image Window displays the image resulting from the current operations. Image Window x Use Original - Sharp to adjust the sharpness of the image's outlines. A Sharper setting makes a more noticeable boundary between bright and dark areas. x Use Dark - Bright to adjust the brightness of the image. x Click OK to show the finished image on the Design Page and on the Select Mask dialog, and close the dialog. x Click Cancel to close the dialog. 110 Quik Reference Alphabetic Index