Dell PowerVault TL4000 Dell Model TL2000/TL4000 Tape Library- User's Guide - Page 120
Setting the Operator Control Panel Access PIN using the Operator Control, Panel, Con
View all Dell PowerVault TL4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Figure 5-17. Configure: Set Access PIN menu Setting the Operator Control Panel Access PIN using the Operator Control Panel: 1. Navigate to Configure → Set Access PIN. 2. Press the SELECT button to highlight the first digit of the 4-digit Access PIN. 3. Use the UP and DOWN buttons to select each digit. 4. Press the SELECT button to move to the next digit. 5. Repeat these steps for repeating the Access PIN. 6. After entering the final digit, press the DOWN button and select one of the following: v Save - to apply your settings. v Cancel - to delete your settings. Note: In Figure 5-18 on page 5-27, menus with the pound sign (#) are the only menus accessible when the Access PIN is enabled, but entered incorrectly or before it is entered. To gain access to all menus, disable the Access PIN or enter the correct PIN number when requested. 5-26 Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide