Dell PowerVault TL4000 Dell Model TL2000/TL4000 Tape Library- User's Guide - Page 251
Media Load/Eject Failed - Sense Key 04 An attempt to load or eject
View all Dell PowerVault TL4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 251 highlights
Table C-2. LTO Tape Drive Sense Data (continued) Bit Address or Name Byte 7 6 5 4 3 2 1 0 12-13 Additional Sense Code (ASC) - Additional Sense Code Qualifier (ASCQ) (Continued) Byte 12 Byte 13 ASC ASCQ 41 00 - Data path failure 43 00 - Message Error - A message could not be sent or received due to excessive transmission errors 44 00 - Internal target failure - A hardware failure has been detected in the drive that has caused the command to fail 45 00 - Select/Reset Failure - An attempt to reselect an initiator in order to complete the command has failed 48 00 - Initiator detected error message received 49 00 - Invalid message error 4A 00 - Command phase error 4B 00 - Data Phase Error - A command could not be completed because too many parity errors occurred during the Data phase 4E 00 - Overlapped Commands - An initiator selected the drive even though it already had a command outstanding in the drive 50 00 - Write Append Error - A write type command failed because the point at which to append data was unreadable 51 00 - Erase failure - An Erase command failed to erase the required area on the media 52 00 - Cartridge fault - A command could not be completed due to a fault in the tape cartridge 53 00 - Media Load/Eject Failed - (Sense Key 03) An attempt to load or eject the cartridge failed due to a problem with the cartridge. 53 00 - Media Load/Eject Failed - (Sense Key 04) An attempt to load or eject the cartridge failed due to a problem with the drive 53 02 - Media Removal Prevented - An Unload command has failed to eject the cartridge because media removal has been prevented 5A 01 - Operator medium removal request 5D 00 - Failure Prediction Threshold - Failure Prediction thresholds have been exceeded indicating that a failure may occur soon 5D FF - Failure Prediction False - A Mode Select command has been used to test for Failure Prediction system. 82 82 - Drive requires cleaning - The drive has detected that a cleaning operation is required to maintain good operation 82 83 - Bad Code Detected - The data transferred to the drive during a firmware upgrade is corrupt or incompatible with drive hardware Appendix C. Sense Data C-9