Dell PowerVault TL4000 Dell Model TL2000/TL4000 Tape Library- User's Guide - Page 185
Error Code, Description, User Action, Table 8-1. Main Error Codes continued
View all Dell PowerVault TL4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
Table 8-1. Main Error Codes (continued) Error Code Description 8E Cannot find gripper block within the expected range 8F Cannot find slider block within the expected range 90 Cannot find elevator block within the expected range 91 Cannot find rotation block within the expected range 92 Cannot find sled block within the expected range 93 Gripper outside range, User Action Gripper has reached a position beyond the expected range 94 Slider outside range, Slider has reached a position beyond the expected range 95 Elevator outside range, Elevator has reached a position beyond the expected range 96 Rotation outside range, Refer to "Isolating a Library Controller Card vs. Accessor Rotation has reached a position beyond Enclosure Problem" on page 7-10. Possible Replacement the expected range CRUs: 97 Sled outside range, v Primary: Library Enclosure v Secondary: Library Controller Card Sled has reached a position beyond the expected range 98 Cartridge present sensor not found 99 Slider home sensor not found 9A Rotation home sensor not found 9B Sled position sensor (fiducial sensor) not found 9C Gripper range out of specification 9D Slider range out of specification 9E Elevator range out of specification 9F Rotation range out of specification A0 Sled range out of specification A1 Open I/O Station (Import/Export Element) failed B0 Robotic controller response timeout. A command did not complete in the required amount of time. B1 NACK (not acknowledged) received from robotic controller B2 Accessor controller communication failed Chapter 8. Error Codes 8-3