Dell PowerVault TL4000 Dell Model TL2000/TL4000 Tape Library- User's Guide - Page 64

a77ug009 3. Using the screws for your rack type (round holes or square holes) and a #2 Phillips screwdriver and ensuring that the flange on each rail points toward the other to form a shelf, secure one rail to each side of the rack in your chosen rack location. Secure both the front and back of each rail to the rack. The narrow end of each rail goes to the rear of the rack. The rails extend to fit a variety of rack depths. Each rail requires 2U of rack space ( 1 in Figure 4-6). 1 Figure 4-6. Rear view of a rack showing the narrow part of the rail 4. Using the Torx wrench included in your shipment, remove the screws ( 1 ) as shown in Figure 4-7. Screw locations on the 4U library are similar. 1 Figure 4-7. 2U library side screws to remove 5. Install the library rack anchors ( 2 ) as shown in Figure 4-8 on page 4-9 on each side of your library using the longest counter-sunk screws included in the rack kit. 4-8 Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide a77ug011