HP LaserJet 4345 HP LaserJet 4345mfp - Software Technical Reference (External) - Page 214

Units, Custom width and height control limits

Page 214 highlights

Any entry that is greater than the maximum limits of the width and height control is rounded down to the maximum valid entry, while any entry that is smaller than the minimum limits of the width and height control is rounded up to the minimum valid entry. If units are in millimeters, the custom media-size range minimum is the limit rounded up to the nearest whole millimeter. The custom media-size range maximum is the limit rounded down to the nearest whole millimeter. Any non-numerical entry reverts to the last valid entry. Width and height entries are validated when the focus has changed. The resolution of each control is one millimeter or one-tenth of an inch, depending on the current measurement units. Units To change measurement units, select one of the radio buttons in the Units group box (either Inches or Millimeters). Custom width and height control limits The minimum media size for the HP LaserJet 4345mfp is 76.2 x 127 mm (3 x 5 inches) and the maximum is 215.9 x 355.6 mm (8.5 x 14 inches). The following table summarizes media size limits for each media-handling device. Table 4-2 PCL 6 custom media sizes Tray Tray 1 (multipurpose) Tray 2 (500-sheet) Tray 3 (500-sheet) Tray 4 (500-sheet) Tray 5 (500-sheet) Duplexing unit Envelope feeder HP 3-Bin Mailbox Stacker, Stapler/Stacker Dimensions Width Height Width Height Width Height Width Height Width Height Width Height Width Height Width Height Width Height Minimum Maximum 76.2 mm (3 inches) 215.9 mm (8.5 inches) 127.0 mm (5 inches) 148.0 mm (5.83 inches) 210.0 mm (8.27 inches) 355.6 mm (14 inches) 215.9 mm (8.5 inches) 355.6 mm (14 inches) 148.0 mm (5.83 inches) 210.0 mm (8.27 inches) 148.0 mm (5.83 inches) 210.0 mm (8.27 inches) 215.9 mm (8.5 inches) 355.6 mm (14 inches) 215.9 mm (8.5 inches) 355.6 mm (14 inches) 148.0 mm (5.83 inches) 215.9 mm (8.5 inches) 210.0 mm (8.27 inches) 355.6 mm (14 inches) Custom sizes not supported Custom sizes not supported Custom sizes not supported Custom sizes not supported Custom sizes not supported Custom sizes not supported Custom sizes not supported Custom sizes not supported 120.0 mm (4.72 inches) 215.9 mm (8.5 inches) 210.0 mm (8.27 inches) 355.6 mm (14 inches) Custom sizes not supported Custom sizes not supported Custom sizes not supported Custom sizes not supported HP unidrivers for Windows 192 4 HP PCL 6, HP PCL 5, and HP PS 3 emulation unidrivers for Windows

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302
  • 303
  • 304
  • 305
  • 306
  • 307
  • 308
  • 309
  • 310
  • 311
  • 312
  • 313
  • 314
  • 315
  • 316
  • 317
  • 318
  • 319
  • 320
  • 321
  • 322
  • 323
  • 324
  • 325
  • 326
  • 327
  • 328
  • 329
  • 330
  • 331
  • 332
  • 333
  • 334
  • 335
  • 336
  • 337
  • 338
  • 339
  • 340
  • 341
  • 342
  • 343
  • 344
  • 345
  • 346
  • 347
  • 348
  • 349
  • 350
  • 351
  • 352

Any entry that is greater than the maximum limits of the width and height control is rounded down to
the maximum valid entry, while any entry that is smaller than the minimum limits of the width and
height control is rounded up to the minimum valid entry.
If units are in millimeters, the custom media-size range minimum is the limit rounded up to the
nearest whole millimeter. The custom media-size range maximum is the limit rounded down to the
nearest whole millimeter. Any non-numerical entry reverts to the last valid entry. Width and height
entries are validated when the focus has changed.
The resolution of each control is one millimeter or one-tenth of an inch, depending on the current
measurement units.
Units
To change measurement units, select one of the radio buttons in the
Units
group box (either
Inches
or
Millimeters
).
Custom width and height control limits
The minimum media size for the HP LaserJet 4345mfp is 76.2 x 127 mm (3 x 5 inches) and the
maximum is 215.9 x 355.6 mm (8.5 x 14 inches). The following table summarizes media size limits
for each media-handling device.
Table 4-2
PCL 6 custom media sizes
Tray
Dimensions
Minimum
Maximum
Tray 1 (multipurpose)
Width
76.2 mm (3 inches)
215.9 mm (8.5 inches)
Height
127.0 mm (5 inches)
355.6 mm (14 inches)
Tray 2 (500-sheet)
Width
148.0 mm (5.83 inches)
215.9 mm (8.5 inches)
Height
210.0 mm (8.27 inches)
355.6 mm (14 inches)
Tray 3 (500-sheet)
Width
148.0 mm (5.83 inches)
215.9 mm (8.5 inches)
Height
210.0 mm (8.27 inches)
355.6 mm (14 inches)
Tray 4 (500-sheet)
Width
148.0 mm (5.83 inches)
215.9 mm (8.5 inches)
Height
210.0 mm (8.27 inches)
355.6 mm (14 inches)
Tray 5 (500-sheet)
Width
148.0 mm (5.83 inches)
215.9 mm (8.5 inches)
Height
210.0 mm (8.27 inches)
355.6 mm (14 inches)
Duplexing unit
Width
Custom sizes not supported
Custom sizes not supported
Height
Custom sizes not supported
Custom sizes not supported
Envelope feeder
Width
Custom sizes not supported
Custom sizes not supported
Height
Custom sizes not supported
Custom sizes not supported
HP 3-Bin Mailbox
Width
120.0 mm (4.72 inches)
215.9 mm (8.5 inches)
Height
210.0 mm (8.27 inches)
355.6 mm (14 inches)
Stacker, Stapler/Stacker
Width
Custom sizes not supported
Custom sizes not supported
Height
Custom sizes not supported
Custom sizes not supported
192
4
HP PCL 6, HP PCL 5, and HP PS 3 emulation unidrivers for Windows
HP unidrivers for
Windows