HP LaserJet 4345 HP LaserJet 4345mfp - Software Technical Reference (External) - Page 84

Software description 5 When prompted for the user name, press Enter. 6 When prompted for the password, press Enter. 7 Type bin at the command prompt. 8 Press Enter. The message 200 Type set to I, Using binary mode to transfer files appears in the command window. 9 Type put , where is the name of the .RFU file that was downloaded from the Web, including the path. For example, type the following: put C:\LJ\4345FW.RFU NOTE If the file name or path includes a space, you must enclose the file name or path in quotation marks. For example, type put "C:\MY DOCUMENTS\LJ\4345FW.RFU" 10 Press Enter on the keyboard. The following series of messages appears in the command window: ● 200 PORT command successful ● 150 Opening BINARY mode data connection ● 226 Ready ● 226 Processing Job ● 226 Transfer complete After these messages appear, a message containing transfer-speed information appears. 11 The download process begins and the firmware is updated on the product. This can take about five minutes. Let the process finish without further interaction with the product or the computer. NOTE The product automatically restarts the firmware to activate the update. At the end of the update process, the READY message appears on the control panel. 12 At the command prompt, type bye to exit the FTP command. 13 At the command prompt, type exit to return to the Windows interface. Macintosh operating systems 1 Take note of the TCP/IP address on the EIO-Jetdirect page. The EIO-Jetdirect page is the second page of the configuration page printout. To print a configuration page, see Determining the current level of firmware. 2 Open a Terminal window on your Macintosh. You can find the Terminal application on the computer hard drive in the Applications/Utilities folder. 3 Type FTP For example, if the TCP/IP address is 192.168.0.90, type the following: FTP 192.168.0.90 62 2 Software description