HP LaserJet 4345 HP LaserJet 4345mfp - Software Technical Reference (External) - Page 252
Mopier mode and collation, Printer Memory
View all HP LaserJet 4345 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 252 highlights
that you send with the mopier disabled loses the advantage of transmitting the print job once, because the print job is sent through the network the same number of times as the number of copies selected. Mopier mode and collation Mopying and collating print jobs are independent but closely related functions. Mopying, the ability to send original print jobs to the product, is performed by the print driver. Collating can be controlled by either the print driver or the document software program. The mopying mode is selected by default in the driver, and can be disabled by changing the Mopier Mode setting on the Device Settings tab to Disabled. You can control collation through the print driver by selecting or clearing the Collated check box on the Advanced tab. You can clear the check box, which is available only when the Copy Count option is set to more than 1 copy, to allow the software program to control collation. To receive uncollated multiple copies of a print job, you must clear the Collated check box and make sure that the software program collation feature is not selected. The following table shows the relation between mopier mode settings and collation settings in the software program and the driver. The first three columns show the settings; the last column, "Expected result,",shows how a three-page print job would appear. Table 4-4 Driver Mopier mode and collation settings Mopier mode Disabled Disabled Disabled Disabled Enabled Enabled Enabled Enabled Application collation Not selected Not selected Selected Selected Not selected Not selected Selected Selected Driver collation Not selected Selected Not selected Selected Not selected Selected Not selected Selected Expected result 3 copies uncollated 3 copies uncollated 3 copies collated 3 copies collated 3 copies uncollated 3 copies uncollated 3 copies collated 3 copies collated Printer Memory This option matches the setting to the amount of memory that is installed in the product. The driver generates ranges of memory that can be selected, up to the maximum that the product can accept. The driver can use this information to manage how the print driver uses the product memory. When a minimum total memory of 48 MB is installed, Job Storage options and the Mopier Mode are enabled in the print driver. The Job Storage options allows you to store print jobs, and then print them later from the control panel. The multiple-original print (mopy) function is an HP-designed feature that produces multiple, collated copies from a single print job. HP unidrivers for Windows 230 4 HP PCL 6, HP PCL 5, and HP PS 3 emulation unidrivers for Windows