HP NetServer AA 4000 HP Netserver AA Solution Administrator's Guide v - Page 106

CE_O/S Shutdown This command performs a shutdown on the CE operating system. Command CE_O/S Shutdown Operation From IOPx Console Syntax MTCCONS CE_O/S Shutdown Operation From IOPx Variables x - the ID number of the IOP (1 or 2) Results The monitor on the specified IOP issues a request to the CE Endurance System Management service to shut down the operating system. The CE Endurance System Management service initiates the system shutdown. The operating system reboots when the CE(s) becomes available, as defined by the CE Auto Boot and Auto Synch parameters. To verify that the CE operating system completes shutdown, from either IOP: • Check the status of the Endurance server in the Endurance Manager Main window. • Issue an IOPn.Monitor Show Configuration command from either IOP to make sure that the CE operating system is offline. • Check the Windows Event Viewer for a message that indicates that the CE operating system has been shut down, disabled, or removed from service. See Also CE Disable Auto Boot CE Disable Auto Synch CE Enable Auto Boot CE Enable Auto Synch Server Shutdown Operation 5-18 HP Netserver AA Solution Administrator's Guide