HP NetServer AA 4000 HP Netserver AA Solution Administrator's Guide v - Page 158

IOPn.Monitor Show Initialization Interval This command displays the initialization interval for the specified IOP. The initialization interval is the time period in seconds that the IOP waits to initialize with the other IOP before either or both of the following occur: • Responding to the CE if Auto Start is true (enabled). • An event is generated if the other IOP does not become available and if Auto Start is false (disabled). By default, Auto Start is disabled and the initialization interval is 120 seconds. Command IOPn.Monitor Show Initialization Interval Console Syntax MTCCONS IOPn.Monitor Show Initialization Interval Variables n - the ID number of the IOP (1 or 2) Results For an example of the results of this command, refer to IOPn.Monitor Show Parameters. See Also IOPn.Monitor Set Initialization Interval IOPn.Monitor Show Parameters IOPn.Monitor Show MIC Interconnect Status This command displays the MIC interconnect status for IOPn, including status information for all system components visible to IOPn. Command IOPn.Monitor Show MIC Interconnect Status Console Syntax MTCCONS IOPn.Monitor Show MIC Interconnect Variables n - the ID number of the IOP (1 or 2) 5-70 HP Netserver AA Solution Administrator's Guide