HP NetServer AA 4000 HP Netserver AA Solution Administrator's Guide v - Page 197
Upgrading MIC Firmware with MTCFLASH, To upgrade the MIC firmware on each IOP and each CE
View all HP NetServer AA 4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
Upgrading MIC Firmware with MTCFLASH To upgrade the MIC firmware on each IOP and each CE: Step 1 2 3 4 5 6 7 Action Notes Insert the MTC diskette into the computer's local floppy drive. Reboot the computer. At the MS-DOS prompt, type mtcflash -f, and wait for the upgrade to complete. Remove the diskette from the floppy drive. If the CE computers do not require the keyboard or mouse to complete POST, you can remove them now. Reboot the computer, either with the reset button or by powering the computer off and then on again. As the computer reboots, make sure that the MIC revision information properly reflects the newly installed MIC firmware revisions. You should consider the Endurance hotfixes installed at your site. If you have hotfixes installed, make sure that the version of MTCFLASH coincides with your hotfix level. If you have a hotfix that supersedes what is contained on the MTC diskette you created, use the hotfix diskette to flash the MICs. In that case, do not use the MTC diskette you created from the Endurance CD. MIC revision information is displayed to the computer's video monitor during boot. If your server does not have a monitor attached to the CE, either attach a monitor temporarily, or use the KVM switch if you installed one. Tools and Utilities 7-11