HP NetServer AA 4000 HP Netserver AA Solution Administrator's Guide v - Page 162
IOPn.ScsiProvider Commands, IOPn.ScsiProvider Set Mirror Copy Bias, Table 5-32
View all HP NetServer AA 4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
IOPn.ScsiProvider Commands The IOPn.ScsiProvider commands display information about the SCSI Provider. Table 5-32 lists the IOPn.ScsiProvider commands. Table 5-32 IOPn.ScsiProvider Commands Command IOPn.ScsiProvider Set Mirror Copy Bias IOPn.ScsiProvider Show Bad Block Status IOPn.ScsiProvider Show Mirror Copy Bias IOPn.ScsiProvider Show Mirror Status Page 5-74 5-75 5-76 5-77 IOPn.ScsiProvider Set Mirror Copy Bias This command sets a bias (preference) favoring either CE disk throughput or mirror copy completion time. This setting is only relevant when a mirror copy is in progress. By default, the bias is two. Command IOPn.ScsiProvider Set Mirror Copy Bias Console Syntax MTCCONS IOPn.ScsiProvider Set Mirror Copy Bias Variables n - the ID number of the IOP (1 or 2) x - a value between 0 and 4, where 0 sets a preference for CE disk throughput, and 4 sets a preference for mirror copy completion time. By default, the bias is 2. Results The setting of the bias value has an immediate effect. For example, if a mirror copy is in progress and you change this setting from 2 to 4, the mirror copy has an increased preference over CE disk throughput. The setting remains in effect, even after IOPs are rebooted. See Also IOPn.ScsiProvider Show Mirror Copy Bias 5-74 HP Netserver AA Solution Administrator's Guide