HP NetServer AA 4000 HP Netserver AA Solution Administrator's Guide v - Page 153

IOPn.Monitor Commands The IOPn.Monitor commands perform operations on the monitor. Table 5-27 lists the IOPn.Monitor commands. Table 5-27 IOPn.Monitor Commands Command IOPn.Monitor Disable Auto Start IOPn.Monitor Enable Auto Start IOPn.Monitor Set Initialization Interval IOPn.Monitor Show Auto Start IOPn.Monitor Show Client Status IOPn.Monitor Show Configuration IOPn.Monitor Show Initialization Interval IOPn.Monitor Show MIC Interconnect Status IOPn.Monitor Show Parameters Page 5-65 5-66 5-66 5-67 5-68 5-69 5-70 5-70 5-72 IOPn.Monitor Disable Auto Start This command disables Auto Start for an IOP. When an IOP reboots, Auto Start allows the specified IOP to automatically join the Endurance server configuration (after the time specified by the initialization interval has elapsed), regardless of whether the other IOP is available. If Auto Start is disabled, the IOP joins the configuration only if the other IOP is present or the other IOP is faulted or disabled. Auto Start is also affected by the IOPn.Monitor Set Initialization Interval command. By default, Auto Start is disabled. Command IOPn.Monitor Disable Auto Start Console Syntax MTCCONS IOPn.Monitor Disable Auto Start Variables n - the ID number of the IOP (1 or 2) See Also IOPn.Monitor Enable Auto Start IOPn.Monitor Set Initialization Interval IOPn.Monitor Show Auto Start Commands 5-65