HP NetServer AA 4000 HP Netserver AA Solution Administrator's Guide v - Page 72

Table 4-2 Administration Window Contents (Continued) Component Description Redirected Devices Indicates the status of the redirected devices that are defined in the Endurance server configuration (Chapter 6). The redirected device types are described below. The icon for a redirected device type is displayed only if one or more devices of that type are redirected. For example, the serial port icon is displayed only if a serial port is redirected. Note: If the IOP where the redirected device physically resides is powered off, faulted, or not booted in Operational EnduranceI/O Processor Mode, the status of the redirected devices may be reported as unknown. If more than one mirrored disk set or non-mirrored disk is present in the system, it is represented as a stack of disks. To determine a disk's position in the stack, start at the bottom of the stack and count disks, starting with zero, as you move up the stack. Because the non-mirrored disks appear only in the disk stack on the IOP where they reside, the position of a mirror set member on one IOP may be in a different location relative to the location of its mirror set member on the other IOP. For information on how to configure redirected devices, refer to Chapter 6. Device states are documented in Chapter 2. SCSI Disks Indicates the status of the redirected SCSI disks from that IOP. The SCSI disk icon displays the number of redirected SCSI disks. For example, the icon shown on the left indicates that four SCSI disks are redirected from this IOP to the CE. CD-ROMs Tape Devices Indicates the status of the redirected device from this IOP. The icon for these devices reports their status on a 1:N basis. For example, if more than one CD-ROM is redirected from an IOP, the least desirable state of any CD-ROM is shown using the icon. 4-10 HP Netserver AA Solution Administrator's Guide