HP NetServer AA 4000 HP Netserver AA Solution Administrator's Guide v - Page 155

Results See Also If the timer expires, check the Windows Event Viewer on the CE for a message that indicates that the IOP is unavailable for initialization. IOPn.Monitor Disable Auto Start IOPn.Monitor Enable Auto Start IOPn.Monitor Show Auto Start IOPn.Monitor Show Initialization Interval IOPn.Monitor Show Parameters IOPn.Monitor Show Auto Start This command displays the Auto Start setting for the specified IOP. • If Auto Start is true (enabled), the specified IOP does not wait for the other IOP, and it continues processing Endurance software. • If Auto Start is false (disabled) and the other IOP is not faulted or disabled, the specified IOP waits indefinitely to initialize with the other IOP. By default, Auto Start is disabled. Command IOPn.Monitor Auto Start -disable_safeguard Console Syntax MTCCONS IOPn.Monitor Show Auto Start -disable_safeguard Variables n - the ID number of the IOP (1 or 2) x - the ID number of the IOP (1 or 2) Results For an example of the results of this command, refer to IOPn.Monitor Show Parameters on page 5-72. See Also IOPn.Monitor Disable Auto Start IOPn.Monitor Enable Auto Start IOPn.Monitor Show Parameters Commands 5-67