HP NetServer AA 4000 HP Netserver AA Solution Administrator's Guide v - Page 126

Table 5-13 Ethernet Port Counters (Continued) Value Meaning Unsolicited Packets Unavailable NdisSend Errors NdisTransferData Errors NdisTransferData Incomplete Receive Indications Redirected Reset Requests Peak Send MDL Count Peak Send Burst Peak Send Bytes Peak Receive Burst Peak Receive Bytes Number of times a packet descriptor could not be allocated. Packet descriptors are used to forward Ethernet packets received by the IOPs to the CEs. This does not indicate that incoming Ethernet packets were dropped. The Ethernet Provider buffers some of the network packets until the unsolicited request buffer becomes available. See also the IOPn.EthernetProvider Show Provider Counters command. Number of errors from NdisSend. NdisSend errors indicate that an Ethernet packet was not transmitted on the network. NdisSend errors are returned by a third-party NIC driver or Windows NDIS software. Number of errors from NdisTransferData. This indicates the number of times a third-party NIC driver failed to copy a received Ethernet packet to a buffer supplied by the Ethernet Provider. Number of times NdisTransferData did not copy the number of bytes requested. This indicates the number of times a third-party NIC driver failed to completely copy a received Ethernet packet to a buffer supplied by the Ethernet Provider. Number of receive indications. This indicates the number of times a third-party NIC driver supplied a received Ethernet packet to the Ethernet Provider for inspection. Number of reset requests received from the networking software on the CEs Redirector send packets peak MDL (Memory Descriptor List) count Largest burst of packets in a single SendPacket Largest transaction in bytes for all SendPackets Largest burst of received packets sent to the Redirector Largest receive transaction (in bytes) sent to the Redirector See Also IOPn.Ethernetx Reset Port Counters 5-38 HP Netserver AA Solution Administrator's Guide